مشخصات پژوهش

عنوان	Brewing Sustainability and Strength: Biocomposite Development through Tea Waste Incorporation in Polylactic Acid
نوع پژوهش	مقاله چاپ شده
کلیدواژه‌ها	Polylactic acid, tea waste, biocomposite, sustainable composites, double keyhole notch, strain energy density, 3D printing
چکیده	This study aims to enhance the mechanical properties of polylactic acid by incorporating black tea waste as an economical and sustainable additive capable of being recycled. The black tea waste, after the hot water color removal process, is milled to a fine and uniform powder size. The combination of these particles with polylactic acid is carried out using a twin-screw extruder. Specimens of pure polylactic acid and biocomposites containing 3 and 5 wt% black tea waste are manufactured using a hot press machine at a temperature of 200 °C. The filaments are also successfully extruded for three-dimensional printing purposes. Scanning electron microscopy images reveal that in the polylactic acid–3% tea biocomposite, the tea particles are appropriately dispersed within the polylactic acid matrix. The tensile test results indicate that biocomposite polylactic acid-3% tea has the highest mechanical properties, with a tensile strength of 67 MPa, demonstrating a 34% increase compared to polylactic acid. Furthermore, the biocomposite of polylactic acid–3% tea waste exhibits the best performance with a fracture energy of 2.5 kJ/m2 in the impact test. Hence, polylactic acid–3% tea biocomposite can be recommended as a suitable sustainable substitute. Finally, numerical simulations are performed on biocomposites containing double keyhole notches. This analysis is conducted to observe the behavior of biocomposite models with double keyhole notch under mixed-mode loading. The critical fracture load of the models is calculated using the strain energy density criterion. It is observed that an increase in the notch inclination angle and notch radius leads to a decrease in the fracture load in the models.
پژوهشگران	مهدی بوداغی (نفر چهارم)، محمد اکبرزاده پاشا (نفر سوم)، ناصر کردانی (نفر دوم)، جواد خداداد (نفر اول)