Naser Kordani

Education

PhD. in (2011 - 2014)
Thesis title:

Courses

Bachelor Of Science

Dynamic design

Mechanical Engineering Design

Master Of Science

Advanced Mathematic

.row3_default .coursesList .courseAcademicLevelContent { opacity: 1; position: static; height: initial; } .row3_default .coursesList .courseWrapper .courseAcademicLevelTitle { visibility: visible; font-family: Arial; font-size: 1.3rem; transition: background-color .5s, color .5s; display: block; float: left; color: rgb(102, 102, 102); background-color: rgb(255, 255, 255); direction: ltr; text-align: left; padding: .5% 2%; cursor: pointer; border-radius: 5%; margin-top: 1%; }

Research activities

Journal Papers

Fracture load in double keyhole notch PLA-Cu2O nanocomposites manufactured via compression molding and 3D printing: an experimental and numerical study Ali Khodadadpoor, Naser Kordani, Mohammad Akbarzadeh Pasha, Ahmad Barari (2024)

Fracture assessment of inclined double keyhole notches in polylactic acid specimens fabricated by fused deposition modeling and traditional method Mohammad Taghi Fateri, Naser Kordani, Hadi Samare Salavatipour, Rasoul Mohammadi (2024)

Brewing Sustainability and Strength: Biocomposite Development through Tea Waste Incorporation in Polylactic Acid Javad Khodadad, Naser Kordani, Mohammad Akbarzadeh Pasha, Mahdi Bodaghi (2023)

3D-printing of Continuous Fiber: A review of processes, materials and properties Mostafa Khosropour Arabi, Naser Kordani (2023)

Investigation of joining mechanism of electrical-assist friction stir joining between Polyethylene (PE) and 316 stainless steel Hamed Aghajani Derazkola, Naser Kordani, Rasoul Mohammadi (2022)

COST ESTIMATION USING COMPUTATIONAL INTELLIGENCE Sarah ALAA MOHAMMED ALMOUSAWI, Ehsan Jahani, Naser Kordani (2022)

Effect of Physical Parameters on the Outlet Temperature of the Shower Cooling Tower Abbas Asghari, Naser Kordani, Ahmad Hallajisani (2022)

Evaluation of nanocomposite structure printed by solid-state additive manufacturing Hamed Aghajani Derazkola, Rasoul Mohammadi, Naser Kordani, Eduardo Garciaa, Alberto Murillo-Marrodán (2022)

Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint Hesamaldin Aghajani Derazkola, Naser Kordani, Hamed Aghajani Derazkola (2021)

Developments on Electron Beam Melting (EBM) of Ti–6Al–4V: A Review Mohammad Karimzadeh, Mohammed Asmael, Mustafa Ilkan, Naser Kordani (2021)

Numerical analysis of heat transfer in helical tube with the aluminum oxide (𝑨𝒍𝟐𝑶𝟑) nano fluid injection in water Hamid Zalnejad, Naser Kordani (2020)

NEW THEORY TO PREDICT THE ELASTIC MODULUS OF CARBON NANOTUBE BASED-COMPOSITES Naser Kordani, Ali Sadough, Rezvan Adibipour (2019)

The Effect of Carbon Nanotube Wall Thickness on Elastic Modulus of Nanocomposite Naser Kordani, Rezvan Adibipour, Ali Sadough (2019)

The Application of Computational Fluid Dynamics (CFD) Method and Several Rheological Models of Blood Flow: A Review Esmaeel Fattahian, Naser Kordani, Hosein Fattahian (2018)

Multi-scale simulation of double-walled Carbon Nanotube- Reinforced composites M. R Bagheri, Naser Kordani, Ali Sadough (2018)

A REVIEW ON RHEOLOGY OF NON-NEWTONIAN PROPERTIES OF BLOOD Esmaeel Fattahian, Naser Kordani, Hosein Fattahian (2018)

SMART PORTABLE CRYOTHERAPY SYSTEM REPHRASED I.E. WITH CONTROLLED THERMOELECTRIC COOLING MODULES FOR MEDICAL APPLICATIONS Abbas Rahmani, Reza Hasanzadeh Pack rezaee, Naser Kordani (2018)

Effect of Ambient Condition on the Shower Cooling Tower in Four Type of Climates Condition Abbas Asghari, Naser Kordani (2018)

Investigation of penetration into woven fabric specimens impregnated with shear thickening fluid Naser Kordani, Ali Sadough (2018)

Mechanical properties of composites made of hybrid fabric impregnated with silica nanoparticles and epoxy resin Naser Kordani, Masoud Alizadeh, F Lohrasbi, Ramin Khajavi, Hamid Baharvand, M Ahmadzadeh, M Rezanejad (2017)

Characterization of the rheological and mechanical properties of shear thickening fluidcoated Twaron® composite Hamid Baharvand, Mina Saeedi, Naser Kordani, Morteza Aleboye, Masoud Alizadeh, Peiman Khaksari (2017)

Response of glass fiber-reinforced hybrid shear thickening fluid (STF) under low-velocity impact Esmael Balali, Naser Kordani, Ali Sadough (2017)

Forced vibration of piezoelectric nanowires based on nonlocal elasticity theory Abdolhosein Fereydoon, Mehdi Divsalar, Naser Kordani, Ali Farajpour (2016)

Effect of the yarn pull-out velocity of shear thickening fluid-impregnated Kevlar fabric on the coefficient of friction† Shahryar Alikarami, Naser Kordani, Ali Sadough, Hosein Amiri (2016)

Effect of silica weight fraction on rheological and quasi-static puncture characteristics of shear thickening fluid-treated Twaron composite Hamidreza Baharvandi, Morteza Aleboye, Masoud Alizadeh, Peiman Khaksari, Naser Kordani (2016)

Numerical Solution of Penetration into Woven Fabric Target Impregnated with Shear Thickening Fluid Naser Kordani, Ali Sadough, Hosein Amiri (2016)

The influences of particle–particle interaction and viscosity of carrier fluid on characteristics of silica and calcium carbonate suspensions-coated Twaron® composite Hamidreza Baharvandi, Morteza Aleboye, Masoud Alizadeh, Mina Saeedi, Naser Kordani, Peiman Khaksari (2016)

The effect of nanoparticles in single‑lap composite joints studied by experimental and numerical analyses M. R Bagheri, Ali Sadough, Naser Kordani, Mojtaba Sadighi (2015)

Books

Materials, design, and technology of body armor Naser Kordani (2023)

WorkShop

Workshop for local directors of the Confucius Institute Naser Kordani (2023)

Publication

Editorial Board Naser Kordani (2024)

Theses

Evaluation of cracks in polymer samples with dual key hole notch using Artificial Neural Network (ANN) and Long Short-Term Memory (LSTM) Luma Ali Shahid Ali Almusawi, Naser Kordani, Ehsan Jahani (2023)

Simulation and Analysis of Crack on 3D printed Samples using Finite Element Method Hussein Alfanharawi, Mahdi Bodaghi, Jafar Nejadali, Naser Kordani (2023)

Prediction of compressive strength of concrete Using ANN and LSTM Ali Imami Jawad Kadhum Alsaadi, Naser Kordani, Ehsan Jahani (2023)

ارزیابی تجربی رفتار بیرون کشیدگی میلگرد فولادی در بتن مقاومت پایین به عنوان تابعی از پوشش بتن و مقاوم سازی با یک لایه ورق CFRP Bagher Ibarahim Esa, Amir Ali Shahmansouri, Naser Kordani, Habib Akbarzadeh Bengar (2023)

بررسی مقاومت پیوستگی میلگرد فولادی با بتن مقاومت پایین محصور شده با یک و دو لایه ورق CFRP متاثر از مقدار پوشش بتن و سایز میلگرد Hayder Abdulameer, Amir Ali Shahmansouri, Naser Kordani, Habib Akbarzadeh Bengar (2023)

ESTIMATING THE AXIAL LOAD CAPACITY OF STEEL COLUMNS IN FIRE USING ANN and LSTM Zahraa Jabber Atta, Naser Kordani, Ehsan Jahani (2022)

Effect of Cu and Ce on Al-17% Si alloy prepared by squeezing casting Ala Aloveidi, Amin Kardgar, Naser Kordani (2022)

Estimation cost of buildings using Artificial Neural network(ANN) and Long Short-Term Memory (LSTM) Sarah Alaa Mohammed Hassn Almousawi, Naser Kordani, Ehsan Jahani (2022)

Numerical Simulation of Rubber Curing Process to Calculate Curing Time and Comparison With Experimental Results Mohammad Rashid, Amin Kardgar, Naser Kordani (2022)

Reforced Of Mechanical Properties of Hybrid Nanocomposite Material Muthanna Al-Hadrawi, Ahmed Aboody Taher, Mohammad Molla-Alipour, Naser Kordani (2022)

Design and Optimization of Linear Concentrating Photovoltaic System for Combined Power, Heat and Mohammad Karimzadeh, Naser Kordani, Ugur Atikol (2016)

.row3_default .researchActivities .researchTypeContent { opacity: 1; position: static; height: initial; } .row3_default .researchActivities .researchActivitiesWrapper .researchTypeTitle { visibility: visible; font-family: Arial; font-size: 1.3rem; transition: background-color .5s, color .5s; display: block; float: left; color: rgb(102, 102, 102); background-color: rgb(255, 255, 255); direction: ltr; text-align: left; padding: .5% 2%; cursor: pointer; border-radius: 5%; margin-top: 1%; } .row3_default .researchActivities .researchTypeContent table .Gv-Empty { text-align: left; direction: ltr; }

Research interests

Advanced Manufacturing/ Additive Manufacturing
Stimulation by FEM software (Fracture and Impact)
Advanced Materials/ Nano Composites structure & Design optimization

International Scientific Cooperation Office (OISC) Council (1394 - present)
Non-Iranian Student Policy Council (1396 - 1398)
Advisor (1400 - 1400)
Director, Knowledge-Based Technological Enterprises Incubator Center (1399 - 1400)
Strategic Council of International and Scientific Cooperation Office in University of Mazandaran (1398 - 1400)
Advisor (1395 - 1397)
Museum director (1396 - 1399)

Naser Kordani

Education

Courses

Research activities

Research interests

Executive activities